Feb 01, 2023 Leave a message

Application Of Molecular Sieve Nitrogen Generator in Magnetic Materials

Cryogenic air separation nitrogen production, PSA nitrogen production, and membrane separation nitrogen production. Nitrogen and membrane separation nitrogen production methods only appeared after the 1990s. In the 1970s and 1980s, there were quite large-scale MnZn ferrite enterprises in China that used the cryogenic air separation method to produce medium and low temperature air. Separation method, use membrane separation method to produce medium and low temperature air separation method, and use high-purity nitrogen technology to produce MnZn type ferrite. Most enterprises use cryogenic air separation method to produce deep-low temperature air separation nitrogen production , deep low temperature air separation nitrogen production, deep low temperature air separation nitrogen production, deep low temperature air separation nitrogen production, deep low temperature air separation nitrogen production, deep low temperature air separation nitrogen production, membrane separation method deep low temperature air separation nitrogen production, membrane separation to 90 In the 1990s, with the development of Nd-Fe-B technology, Nd-Fe-B technology gradually developed. Except for enterprises with small production scale (annual production capacity less than 50 tons), they still used bottled nitrogen and liquid nitrogen. Some have been nitrided on site. On-site production of high-purity nitrogen with self-purchased nitrogen equipment requires a large investment, but the overall cost of operation is relatively low, generally within 0.7 yuan/m3.

The characteristics of the cryogenic air separation molecular sieve nitrogen generator and the membrane separation nitrogen equipment are selected according to the advantages of different gas production and purity ranges and based on comprehensive comparison. The nitrogen sources used in the production of domestic magnetic materials are different due to the establishment time, start-up capital, production scale, nitrogen source situation and understanding of various material production enterprises at that time, and the nitrogen sources or nitrogen supply methods used are also different, which can be attributed to: Bottling manufacturers of pure nitrogen, liquid nitrogen, cryogenic air separation nitrogen and PSA nitrogen.

Bottled high-purity nitrogen is mainly used in enterprises that use vacuum atmosphere sintering furnaces as sintering equipment. It is intermittent sintering. Generally, the production cycle is 24 hours. The furnace capacity is 15~50kg. For 3~4 hours, the production scale of this type of enterprise is not large, there are only a few furnaces at least, and only twenty or thirty furnaces at most. The volume of the cylinder used for bottled high-purity nitrogen is 40 liters, the nitrogen injection pressure is 150kg, the nitrogen volume is 6nm3/h/bottle, and the current market price is 30 yuan/bottle. According to the usage regulations, when the pressure in the bottle drops to 15kg, it is not allowed to continue to use, otherwise it must be replaced and cleaned in the future to ensure the high purity of nitrogen. Therefore, when bottled nitrogen is used, the unit price of nitrogen is 5.5 yuan/m3. Although the cost of gas consumption is high, due to the small scale of the enterprise and the small total consumption, the use of bottled nitrogen is still acceptable, so generally the gas supply method will not be changed, only when the scale expands and the nitrogen kiln is considered to be used.

At present, the market price of liquid nitrogen is about 1,000 yuan/m3. When liquid nitrogen evaporates into nitrogen, 1m3 of liquid nitrogen can be converted into 643m3 of nitrogen under standard conditions. Considering factors such as losses, the usable nitrogen is about 600m3, so use liquid The unit price of nitrogen in nitrogen is 1.67 yuan/m3, which does not include the cost of purchasing or leasing liquid nitrogen tanks. Taking the Mnzn ferrite company as an example, in the early days of establishment, the magnetic material enterprises using liquid nitrogen were small in scale, all about 300 tons per year. Generally, there was only one tunnel kiln protected by nitrogen gas, and the gas consumption was 20~30nm3/h. (24 hours) The gas supply volume is 480~720nm3. If you use bottled nitrogen again, you will need about 100 bottles per day, which is too expensive to use; if you buy on-site nitrogen production equipment, although the gas cost can be reduced by about two-thirds, considering factors such as funds and future development, Users generally choose liquid nitrogen first, and then decide according to the situation.

Send Inquiry

Home

Phone

E-mail

Inquiry